0 votes
in ESP8266 WiFi Color Kit by (130 points)
edited by
frames go so fast you can't read them..

If I touch it at the bottom left only I can get them to stop

screens change to fast

Also have this error on the main page

Last Reset:

Fatal Exception:0 flag:6

(EXT_SYS_RST)

epc1:0x00000000

I guess this error is normal ...I see it on the demo you have on the for sale page

sorry

1 Answer

+1 vote
by (2.9k points)
edited by

Hi,

 "epc1:0x00000000" is OK :)

For slowing down the timing say 2 times slower, you can put in .ino file after Carousel carousel(&gfx, 0, 0, 240, 100); at the end of setup() section.

carousel.setTimePerFrame(10000);  //10 seconds [default is 5s]
carousel.setTimePerTransition(1000); //1 sec [default is 0.5s]

More info, see minigrafx code. If the functions above are not set in user code, then they are calculated by default values:

uint8_t updateInterval = 33;
uint16_t ticksPerFrame  = 151; // ~ 5000ms at 30 FPS
uint16_t ticksPerTransition = 15; // ~  500ms at 30 FPS

by (130 points)
Got this error....Sorry   ...But thanks for helping

esp8266-weather-station-color__02:112: error: 'carousel' does not name a type

 carousel.setTimePerFrame(10000);  //10 seconds [default is 5s]

 ^

esp8266-weather-station-color__02:113: error: 'carousel' does not name a type

 carousel.setTimePerTransition(1000); //1 sec [default is 0.5s]

 ^

exit status 1
'carousel' does not name a type
by (2.9k points)
edited by
Sorry,
The lines shouldn't  be placed there, please place them in setup() section, after other 2 lines starting with carousel. ...

  carousel.setFrames(frames, frameCount);
  carousel.disableAllIndicators();
//here:  
  carousel.setTimePerFrame(10000);  //10 seconds [default is 5s]
  carousel.setTimePerTransition(1000); //1 sec [default is 0.5s]

Note, maybe you need only the time per frame setting change. The other slows the transition moving.
by (130 points)
ok that worked...but it made no difference in the speed they change ..
I tried different numbers ...no luck
maybe the touch screen is bad ..
when I touch the screen .. the blue light on the back flashes bright and screen just keeps moving .. I didn't get to calibrate the screen it never ask me to..

Thanks Again
by (2.9k points)
I probably misunderstood your question and problem.
I thought you wanted to slow down the 3 x 2 forecast icons that automatically rotate every 5 sec. It looks you have another issue - it is the touching stuff.

To re-enable calibration once. You have to uncomment following line:
 //SPIFFS.remove("/calibration.txt");
Then recompile and run once.
Then comment again and recompile.
by (130 points)
the screens flash by so fast 2 sec view and that's it...
won't stop no matter where I touch the screen..
If I touch it at the bottom left only I can get them to stop

I did what you said got the calibration screen for 2 sec.and gone reset tried again same thing...no help

Thanks for the other settings I did get them to slow down

Welcome to ThingPulse Q&A, where you can ask questions and receive answers from other members of the community.

https://thingpulse.com

...